Line Preview - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

Administration
Multiline Appearance/Keyset

3.11.4 Line Preview

156
Administration via Local Phone
|
--- Admin
|--- System
|--- Features
|--- Keyset operation
|--- Rollover ring
|--- LED on registration
|--- Originating line preference
|--- Terminating line preference
|--- Line action mode
|--- Show focus
|--- Reservation timer
|--- Forward indicated
|--- Preselect mode
|--- Preselect timer
Administration via Local Phone
|
--- Admin
|--- System
|--- Features
Configuration
|--- General
|--- Bridging enabled
Related Topics
This key enables the preview mode, which allows the user to preview a line before
using it.
When preview mode is active, the line keys behave similar to when the keyset
configuration is set to preselection for line keys (see Configure Keyset Operation).
On pressing the line key (not DSS key!), the call activity on the corresponding line
is shown. Unlike with a preselected line, there will be no change to the phone's
current line connections. The LED indicates whether line preview is active or not.
The information shown to the user depends on the ring/alert configuration for the
line in question. If the line is configured to alert only, the preview will only show
the state of the call, not the identity of the calling party. If the line is configured to
ring, the identity of the calling party will be revealed.
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013