Security-Related Faults; Password Policy; General Policy - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

3.4.4 Security-Related Faults

3.4.5 Password Policy

3.4.5.1 General Policy

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
INFO: The entries in this list are only displayed until they are
reported to the DLS, which usually happens very fast. After that,
the entries are automatically deleted from the phone. If the entries
are not deleted automatically, they can be deleted manually by
using the Cancel faults parameter.
Security log entry shows the date and time of a loss of security log entries.
OCSR failure shows the date and time when the phone was unable to connect
to any certificate checking server for revoked certificates.
Admin access shows the date and time when the phone encountered multiple
consecutive failures to enter the admin password.
User access shows the date and time when the phone encountered multiple
consecutive failures to enter the user password.
Administration via WBM
System > Security > Faults
Related Topics
Related Topics
Expires after (days) sets the maximum validity period of a password.
Warn before (days) specifies when the user/admin is notified that his password
will expire.
Force changed only affects the User password. When Force changed is
activated, the user will be forced to change his/her password at next login.
Tries allowed specifies the maximum number of password entry trials before the
password is suspended. Values: 0 (no limits), 2, 3, 4, 5
No change for (hours) specifies a period before a password is allowed to be
changed again. Value range: 0 to 99
Suspended for (mins) defines how long a password will be suspended after the
number of failed retries has exceeded. Value range: 0 to 99
Administration
Security
73