Using The Phone; Control Key - Siemens GIGASET C595 Manual

Using the phone

Control key

Below, the side of the control key that you must press in
the respective operating situation is marked in black
(top, bottom, right, left, centre), e.g. v for "press right
on the control key" or w for "press the centre of the
control key".
The control key has a number of different functions:
When the handset is in idle status
s
v
u
t
In the main menu
t, s, v or u
In submenus and lists
t / s
In input fields
Use the control key to move the cursor up t, down s, right v or left u.
Press and hold v or u to move the cursor word by word.
During an external call
s
u
t
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u
In idle status the key opens the main menu.
u
In submenus, selection and input fields the key takes on the function of
the display keys
Please note
In these instructions, opening the main menu is represented by pressing
right on the control key and functions are confirmed by pressing the corre-
sponding display key. However, if you prefer, you can use the control key as
described above.
Open the directory.
Open the main menu.
Open the list of handsets.
Call up the menu to set the call volume (
the handset.
Navigate to the required function.
Scroll up/down line by line.
Open the directory.
Initiate an internal consultation call.
Adjust the loudspeaker volume for earpiece and speaker mode.
, ,
§OK§ §Yes§ §Save§
¢
, or .
§Select§ §Change§
Using the phone
page 64) of
19