Siemens A31003-D3000-M100-01-76A9 Administrator User Manual page 168

Administration
Dialing
168
standard timer, which is found on the WBM under User menu > Configuration >
Outgoing calls > Autodial delay (seconds), is overridden if a dial plan rule is
matched.
A dial plan consists of rules defining patterns, timeouts and actions to be
performed when a pattern is matched and/or a timeout has expired. The phone
can store one dial plan, which can contain up to 48 different rules.
It is very important that the phone's dial plan does not interfere with the dial plan
in the SIP server, PBX, or public network.
The dial plan can be created and uploaded to the phone using the DLS (please
refer to the OpenScape Deployment Service Administration Manual). The DLS
can also export and import dial plans in .csv format. For details about the compo-
sition of a dial plan, please refer to Example Dial Plan.
The current dial plan, along with its status (enabled/disabled) and error status can
be displayed on the WBM via Diagnostics > Fault trace configuration >
Download dial plan file.
The Dial plan ID and the Dial plan status is displayed in the local menu.
To make use of the dial plan facility, the following requirements must be met:
• A correct dial plan is loaded to the phone.
• In the user menu, Allow immediate dialing is enabled.
INFO: This condition is only necessary for on-hook dialing, but
not for off-hook dialing.
• Dial plan enabled is checked.
Administration via WBM
User menu > Configuration > Outgoing calls > Allow immediate dialing
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013