How To Access The Web Interface (Wbm) - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

2.3.1 How to Access the Web Interface (WBM)

Prerequisites
Step by Step
A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
an existing data profile to the phone's MAC address or E.164
number. For further information, see the Deployment Service
Administration Manual.
INFO: Any settings made by a DHCP server are not configurable
by other configuration tools.
Related Topics
• The phone´s IP address or URL is required for accessing the phone´s Web
Interface via a web browser. By default, the phone will automatically search
for a DHCP server on startup and try to obtain IP data and further configu-
ration parameters from that central server.
• If no DHCP server is available in the IP network or if the DHCP parameter is
disabled, the IP address, subnet mask and default gateway/route must be
defined manually.
• To obtain the phone´s IP address, proceed as follows:
1) Access the local phone´s Admin menu as described in
Phone.
• If DHCP is enabled (default): In the Admin menu, navigate to Network >
IPv4 configuration > IP address. The IP address is displayed.
• If DHCP is disabled or if no DHCP server is available in the IP network,
the IP address, subnet mask and default gateway/route must be defined
manually as described in
Address.
2) Open your web browser (MS Internet Explorer or Mozilla Firefox) and enter
the appropriate IP address or URL.
Example: https://192.168.1.15 or https://myphone.phones
How to Manually Configure the Phone´s IP
Startup
Quick Start
Access via Local
17