Cloud Deployment (V3 R1); Process Of Cloud Deployment - Siemens A31003-D3000-M100-01-76A9 Administrator User Manual

2.5 Cloud Deployment (V3 R1)

2.5.1 Process of Cloud Deployment

A31003-D3000-M100-01-76A9, 02-2013
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
This chapter describes how a phone progresses through the cloud deployment
process from factory start-up until the cloud service provider considers it to be
ready for use by its user.
The phone determines that a cloud deployment process is to be used based on
the IP settings it receives from the DHCP at the customer site. The SEN Redirect
1
server requires a code to determine which cloud service provider is responsible
for the phone. The code is provided as part of a pin supplied from the cloud organ-
isation to the user. When the user enters the pin at the phone the SEN Redirect
server redirects the phone to a DLS-WPI based management system operated by
the cloud service provider. This management system completes the configuration
of the phone with all the information required for it to be usable and may also
customise the phone for the cloud service provider's 'house' style.
Related Topics
The following flow chart shows the way from a factory start-up to a user prepared
OpenScape Desk Phone, deployed by a relevant DLS-WPI based management
system.
Preconditions:
• Phone is not running
• Phone is set to factory default values
• The phone has a LAN connection
1. The address for the SEN Redirect server is hardcoded as "cloud-setup.com"
Startup
Cloud Deployment (V3 R1)
35