Siemens A31003-D3000-M100-01-76A9 Administrator User Manual page 158

Administration
Multiline Appearance/Keyset
158
Press busy n.rel.
second. line
key 1x
Press busy n.rel.
second. line
key 1x
Press busy n.rel.
second. line
key 1x
Press busy n.rel.
second. line
key 2x while
line-view is dis-
played
Press busy n.rel.
second. line
key 2x while
line-view is dis-
played
In case the Preview key is not pressed, only the Preselection mode configuration
is relevant:
• if Preselection is selected then the line status is displayed after 1st line press
• if Single button is selected then bridging is invoked (if line busy, bridging
enabled)
In case the Preview key is pressed first and then the line key, the Preselection
mode configuration is not relevant.
• if Preview mode is activated then the Preview key LED remains on (preview
mode must be deactivated manually by pressing the Preview key again).
• if Preview mode is deactivated then the Preview key LED is turned off after
preview timer expiry
– if Bridging priority= Bridging overrides preview then pressing the busy line
key invokes bridging
– if Bridging priority= Preview overrides bridging then pressing the line key
displays the line status, however pressing the line key twice bridging will
be invoked.
Related Topics
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
n.rel. yes - -
n.rel. - yes yes
n.rel. yes - yes
n.rel. - yes yes
n.rel. yes - yes
A31003-D3000-M100-01-76A9, 02-2013
yes Bridge (confer-
ence)
Preview LED
remains on
- Line status is dis-
played (Preview
timer)
Preview LED -> off
- Line status is dis-
played (Preview
timer)
Preview LED
remains on
- 1st press: line sta-
tus
2nd press: bridge
(conference)
Preview LED -> off
- 1st press: line sta-
tus
2nd press: bridge
(conference)
Preview LED
remains on