Service Message - Microscan MINI Hawk User Manual

Service Message

When Service Message is enabled, a message of up to 10 ASCII characters is sent
whenever the system detects that the service timer's limit has been reached. The service
timer is reset at power-on, meaning that the service timer's limit is the amount of time
since last reset. Service timer increments can be set in seconds or minutes.
<K409,status,service message,threshold,resolution>
Serial Cmd:
Default: 0
Options: 0 = Disabled

Service Message

<K409,status,service
Serial Cmd:
Default: SERVICE
An ASCII string between 1 and 10 characters.
Options:
Important: The ASCII characters <, >, and
For <:
<K409h,,3C>
For >:
<K409h,,3E>
For :
,
<K409h,,2C>
See
ASCII Character Entry Modifier
enter ASCII characters as hex values.
Threshold
<K409,status,service message,threshold,resolution>
Serial Cmd:
Default: 300
1 to 65535
Options:
Resolution
<K409,status,service message,threshold,resolution>
Serial Cmd:
Default: Seconds
Options: 0 = Seconds
MINI Hawk High Performance Imager User's Manual
message,threshold,resolution>
on page 3-32 for a detailed explanation of how to
(5 minutes)
1 = Enabled
can only be entered as hex pairs:
,
1 = Minutes
I/O Parameters
7-35