Microscan MINI Hawk User Manual page 299

Contents
Serial Utility Commands ............................................................................................................. 13-2
Read Rate .................................................................................................................................. 13-4
Counters ..................................................................................................................................... 13-5
Device Control ............................................................................................................................ 13-7
Differences from Default............................................................................................................. 13-8
Master Database ........................................................................................................................ 13-9
Firmware................................................................................................................................... 13-15
Default/Reset/Save................................................................................................................... 13-18
Imager Status Requests ........................................................................................................... 13-20
Other Operational Serial Commands ....................................................................................... 13-22
Utility commands are generally commands that are performed during imager operations to
check or determine read rates, or to perform miscellaneous operations on imager hardware.
Serial utility commands are not prefaced with a "K" and a numeric code, nor do they require an
initialization command
or from ESP's Terminal or Utilities windows.
MINI Hawk High Performance Imager User's Manual
(<A> and <Z>). They can be entered from within any terminal program
13 Utilities
13-1