Microscan MINI Hawk User Manual page 55

Parity, Auxiliary Port
Only changed if necessary to match host setting.
Usage:
An error detection routine in which one data bit in each character is set to 1
Definition:
or 0 so that the total number of 1 bits in the data field is even or odd.
<K101,aux port mode,baud rate,parity,stop bits,data bits,daisy chain i.d.
Serial Cmd:
status,daisy chain i.d.>
Default: None
Options: 0 = None
Stop Bits, Auxiliary Port
Only changed if necessary to match host setting.
Usage:
Allows the user to select the last one or two bits in each character to indicate
Definition:
the end of the character.
<K101,aux port mode,baud
Serial Cmd:
status,daisy chain i.d.>
Default: One
Options: 0 = One
Data Bits, Auxiliary Port
Only changed if necessary to match host setting.
Usage:
Number of bits in each character.
Definition:
<K101,aux port mode,baud rate,parity,stop
Serial Cmd:
status,daisy chain i.d.>
Default: Eight
0 = Seven
Options:
MINI Hawk High Performance Imager User's Manual
1 = Even
rate,parity,stop bits,data bits,daisy chain i.d.
1 = Two
bits,data
1 = Eight
Communications
2 = Odd
bits,daisy chain i.d.
3-11