Australia Post - Microscan MINI Hawk User Manual

Symbologies
U.S. Post (POSTNET, PLANET, USPS4CB)
When U.S. Post is enabled (<K460,1>), the imager will only decode POSTNET, PLANET,
and USPS4CB symbols.
Important: POSTNET Status, PLANET Status, and USPS4CB Status are enabled by
default. However, if any of the three U.S. Post symbologies is set to disabled individually,
symbols of that type will not be decoded by the imager even when U.S. Post is enabled.
For example, if U.S. Post is enabled but POSTNET Status is disabled (<K460,1,0>),
POSTNET symbols will not be decoded by the imager.
See Status, and for more detail about
POSTNET Status, PLANET GS1 DataBar (RSS)
U.S. Post symbologies.

Australia Post

When Australia Post is enabled (<K460,2>), the imager will only decode Australia Post
symbols.
Japan Post
When Japan Post is enabled (<K460,3>), the imager will only decode Japan Post symbols.
Royal Mail
When Royal Mail is enabled (<K460,4>), the imager will only decode Royal Mail symbols.
KIX
When KIX is enabled (<K460,5>), the imager will only decode KIX symbols.
UPU
When UPU is enabled, the imager will decode UPU symbols and any U.S. Post symbologies
that might be enabled.
For example, if Postal Symbology Type is set to UPU and POSTNET Status is enabled
and (<K460,6,1>), the imager will attempt to decode both UPU and POSTNET symbols.
6-31
MINI Hawk High Performance Imager User's Manual