Illumination Brightness - Microscan MINI Hawk User Manual

Illumination Brightness

Illumination Brightness

This feature allows the user to adjust the brightness of the illumination
Definition:
LEDs. Since the imager has control over the brightness of the illumination,
it can provide consistent brightness output between imagers through a
factory calibration operation. Each of the brightness settings is calibrated
to provide the same level of intensity for each imager.
<K536,brightness>
Serial Cmd:
Default: High
0 = Off
Options:
1 = Low
2 = Medium
3 = High
4 = Constant
Constant
When set to Constant, the illumination is the same as the Medium setting. However, the
LEDs will always be on during a read cycle and will only be off between read cycles. This
cuts down on perceptible LED flashing.
10-22
MINI Hawk High Performance Imager User's Manual