Microscan MINI Hawk User Manual page 333

Length
Specifies the length of the decoded symbol allowed to occupy this location in
Definition:
multisymbol output.
Note: To filter or order a symbol, the symbol must meet all requirements of
the selected filter index.
Serial Cmd: <K744,filter number,symbology,length,wildcard,placeholder,data,
unused,database index>
Default: 0
0 to 64
Options:
Wildcard
This is the character to be used in the data output field when performing a
Definition:
data filter comparison. The wildcard character represents the end of matching,
and allows for variable lengths of symbol output.
Serial Cmd: <K744,filter number,symbology,length,wildcard,placeholder,data,
unused,database index>
" " =
*
Default:
Any ASCII input in the form of a pair of hex characters.
Options:
Example:
2A =
00 = disabled
See
ASCII Character Entry Modifier
enter ASCII characters as hex values.
Placeholder
The placeholder character requires a character to be present, but does not
Definition:
compare the data value.
Serial Cmd: <K744,filter number,symbology,length,wildcard,placeholder,data,
unused,database index>
" " =
Default: ?
Any ASCII input in the form of a pair of hex characters.
Options:
Example:
3F = ?
00 = disabled
See
ASCII Character Entry Modifier
enter ASCII characters as hex values.
MINI Hawk High Performance Imager User's Manual
(hex)
2A
*
on page 3-32 for a detailed explanation of how to
(hex)
3F
on page 3-32 for a detailed explanation of how to
Output Format
14-11