Microscan MINI Hawk User Manual page 184

Serial Verification
Control/Hex Output
Useful for viewing settings with binary characters when using serial commands
Usage:
on a terminal.
Determines the response to a Serial Command Echo or status request
Definition:
command.
When set to Control, two characters are transmitted to represent a non-displayable
character. For example, a carriage return will be shown as: ^M.
<K701,serial command echo status,serial command beep status,control/hex
Serial Cmd:
output>
Default: Control
Options: 0 = Control
7-16
1 = Hex
MINI Hawk High Performance Imager User's Manual