FBII XL-4 Programming Manual page 87

Auto Dump Account Number
190 AUTO DMP ACC
0000
Enter a four-digit account number that will be sent whenever this account transmits system
log information. This account number is for reference purposes only and will be printed at
the top of the remote report for identification purposes.
This account number has no bearing on the account numbers transmitted to the Central
Station for alarm activity.
Auto Dump Description 1
191 AUTO DMP
________________
The printer at the DUMP phone number merely answers the telephone number and prints
the information that is transmitted. Provision is made for the entry of four lines of comments
to be transmitted as a heading for each printout.
This description should be used to identify the account at the remote printer with
information such as account name, address, special instructions, etc.
Enter the first line of descriptive information.
Auto Dump Description 2
192 AUTO DMP
________________
Enter the second line of descriptive information.
Auto Dump Description 3
193 AUTO DMP
________________
Enter the third line of descriptive information.
Auto Dump Description 4
194 AUTO DMP
________________
Enter the fourth line of descriptive information.
Refer to the KEYPAD PROGRAMMING SUMMARY for a quick guide to programming. If you have any
questions, please call our Technical Service Department at (800) 645-7492.
D#1
D#2
D#3
D#4
Section 8 - LCD Keypad Programming Questions
8–65