FBII XL-4 Programming Manual page 84

XL-4, XL-4B, and XL-5 LCD Keypad Programming Manual
Keypad Assignment Partition
180
NNNNNNNNYNNNNNNN
Enter the keypad assignment for the partition number indicated by x. To access each of the
sixteen keypads within the partition use the FORWARD (INSTANT) and BACKWARD
(CODE) keys and the TOGGLE (0) key will change the Yes/No status of each keypad.
Remember, keypads 1-8 are LED while keypads 9-16 are LCD.
If you intend on performing keypad programming you must have at least one LCD keypad
assigned to the system.
For UL Listed systems, all keypads must be assigned to a single partition, the same partition as
U L
the zones and user codes.
Partition Description
181 DESCR PARTx
________________
A sixteen-character description can be entered for each partition. This allows customization
for each installation. This description will appear on the second line of the SYSTEM READY
display of LCD keypads. Examples could include SMITH RESIDENCE, or STOCK ROOM
#3, etc.
Primary CS Account Number
182 CS1 ACC P # _
____
Enter the account number to be reported to CS#1 (Question #3). The portion of the display
labeled P# indicates the partition number being entered.
The account numbers can be up to four digits. If a three-digit account number is desired then
enter XXXb, where XXX is the desired three-digit account number followed by a blank
(depression of the SHIFT key followed by the 8).
If the partition should not report to CS#1 then enter a blank account number. To erase an
existing account number, position the cursor on the first digit and depress the SHIFT ( ) key
followed by the 8 key.
Valid entries for the account number question includes the digits 0-9 and A-F (SHIFT 1 -
SHIFT 6). Enter the account number exactly the way it would be seen at the receiver.
The programming sequence accepts entry of both 0 and A as valid account number digits.
Depending on the format transmitted some of these digits may not be valid. Consult your Central
Station Manager to determine the valid digits accepted by your receiver for the format
transmitted.
Secondary CS Account Number
183 CS2 ACC P# _
____
Enter the account number to be reported to CS#2 (Question #8). The portion of the display
labeled P# indicates the partition number being entered.
8–62
KPAD PART x
Version 4