FBII XL-4 Programming Manual page 53

Cutoff Timer #3
078 TIMEOUT3 3MN
02 (00-15)
The control panel contains three different bell cutoff times that can be selected for the alarm
and trouble types. Enter the duration of timeout #3 in three minute intervals.
The cutoff time selected for the alarm bell in residential applications shall be a 4-minute
minimum.
The cutoff time selected for the alarm bell in UL Commercial Burglary applications shall be a
U L
minimum of 16 minutes.
Global Bell Lockout Counter
079 GLOB BELL LK
15 (00-15)
Indicates the total number of bell activations from all zones of the panel that will cause bell
lockout. This counter will be reset with each arming of the system and will only be
incremented by controllable zones that have been defined with the lockout feature enabled
(question #166). The bell lockout feature merely prevents repeating activity from triggering
the bell. Signals will continue to be transmitted to the Central Station in accordance with the
zone definition. If signals are to be suppressed, then the dialer lockout feature should be
considered. Default = 15 (None). If you do not want bell lockout enter 15.
U L
For UL Listed systems this option shall be programmed "15".
Local Bell Lockout Counter
080 LOC BELL LK
15 (00-15)
Indicates the number of bell activations for an individual zone that will cause a bell lockout.
This counter will be reset with each arming of the system and applies only to burglary zones
that have been defined with lockout enabled (see question #166). Default = 15 (None). If you
do not want bell lockout enter 15.
U L
For UL Listed systems this option shall be programmed "15".
Global Dialer Lockout Counter
081 GLOB DIAL LK
15 (00-15)
Indicates the number of dialer activations from all zones of the panel that will cause a dialer
lockout. This counter will be reset with each arming of the system and applies only to
Section 8 - LCD Keypad Programming Questions
8–31