FBII XL-4 Programming Manual page 58

XL-4, XL-4B, and XL-5 LCD Keypad Programming Manual
Download Code
097 DOWN CODE
F 0-F
The EZ-MATE Downloading software can transmit database information from the Alarm
Company to the control panel. Upon completion of a communications session
(upload/download or remote commands) the panel can transmit a signal to the Central
Station receiver to verify that a downloading has taken place. This download code will be
sent based on the Download code reporting path (question 040).
The Download code will transmit the account number for partition #1.
Download Code ID Code (PID Format)
098 DOWN ID CODE
255 000 - 255
If the Central Station reporting format selected is Point ID then this defines the ID (zone) to
be transmitted to the CS when the system completes a communications session with the
EZ-Mate PC Downloading Software. If PID Format is selected then an event code of 306 is
transmitted. If the Extended, Partial Extended, or 4 X 2 format is selected, this will be the
second digit transmitted following the download code (question 097).
Buzzer On AC Loss
099 BUZ AC LOSS
YES
Indicates whether the buzzer should be activated upon AC Loss.
Buzzer On Low Battery
100 BUZ LOW BATT
YES
Indicates whether the buzzer should be activated upon a low battery condition.
Buzzer On System Error
101 BUZ SYS ERR
YES
Indicates whether the buzzer should be activated upon a system error condition. A system
error will occur if there is a missing keypad or the system is having trouble communicating
with a keypad that has previously existed.
24 Hour - AC Loss
102 24HR AC LOSS
YES
Indicates whether the buzzer should be activated when the system is armed and a loss of AC
power is detected.
24 Hour - Low Battery
103 24HR LOW BAT
YES
Indicates whether the buzzer should be activated when the system is armed and a low
battery condition is detected.
8–36
Version 4