FBII XL-4 Programming Manual page 35

Remote Disarm Enable
018 REM DISARM
YES
Indicates whether this panel can be disarmed remotely through the EZ-MATE PC Based
Downloader. This question provides an additional layer of security for remote operations.
This question will be skipped if the answer to the Remote Operations question 17 is NO. If
the system is programmed for transmission of closing signals then the signal will be sent
after completion of the downloading session.
U L
This question must be answered "NO" for UL listed systems.
Remote Arm Enable
019 REM ARM
YES
Indicates whether this panel can be armed remotely through the EZ-MATE PC Based
Downloader. This question provides an additional layer of security for remote operations.
This question will be skipped if the answer to the Remote Operations question 17 is NO. If
the system is programmed for transmission of opening signals then the signal will be sent
after completion of the downloading session.
Remote Bypass Enable
020 REM BYPASS
NO
Indicates whether this panel can have individual zones bypassed or unbypassed remotely
through the EZ-MATE PC Based Downloader. This question will be skipped if the answer to
the Remote Operations question 17 is NO. If the system is programmed for transmission of
bypass signals, then the signal will be sent after completion of the downloading session.
U L
This question must be answered "NO" for UL listed systems.
Number Of Attempts
021 # ATTEMPTS
08 (01-16)
Indicates the number of attempts made by the dialer to reach the Central Station receiver.
Transmission will repeat up until the maximum number of attempts if a transmission is
unsuccessful.
If the Central Station reporting path transmits signals to either receiver telephone numbers
then transmission will alternate between the two numbers if either line is busy.
Default value = 08, 16 means 16 attempts.
U L
For UL Listed applications this shall be programmed for a value between 5 and 10 attempts.
Section 8 - LCD Keypad Programming Questions
8–13