FBII XL-4 Programming Manual page 47

Enable Quick Arming
054 QUICK ARM
YES
Indicates whether the quick arming command [ # 1 ] will be available to users of the system.
This enable is system-wide in a multi-partitioned system.
Quick arming will transmit the CLOSE code, if programmed, along with the first user
number defined for the partition if the transmission format sends a user code.
Enable Quick Forced Arming
055 QUICK F-ARM
YES
Indicates whether the quick forced arming command [ # 2] will be available to users of the
system.
If quick forced arming is enabled then it will be available throughout all partitions of a
multi-partitioned system.
Quick forced arming will transmit the CLOSE signal, if programmed for CS transmission,
along with the first user code defined for that partition if the transmission format sends a
user code.
U L
In UL Listed systems this option must be "NO".
Press the 0 key to toggle between the available choices.
Secure Forced Arming
056 SECURE F-ARM
YES
This indicates whether the forced arming function will be permitted within the system. The
forced arm sequence requires a user code as follows: BYPASS [User Code] BYPASS. This
applies to all partitions within the system. This option is independent of the quick forced arm
option in the previous question.
U L
In UL Listed systems this option must be "NO".
Section 8 - LCD Keypad Programming Questions
8–25