FBII XL-4 Programming Manual page 20

XL-4, XL-4B, and XL-5 LCD Keypad Programming Manual
EXAMPLE: SHIFT NEXT QUESTION 003
After depressing the SHIFT key followed by the NEXT QUESTION key the following display
will appear:
DIRECT ACC. MODE
ENTER QUES.#_
Enter 0 0 3. This will obtain question number 003 as follows;
003 CS#1 PH. #
234
In this particular example, the primary Central Station telephone number question was
obtained. At this point, the contents of this field can be modified or another question can be
obtained. If the question requested belongs to an area that contains multiple offsets then the
direct access method will first obtain the selection display for that group. Specifically, this
applies to the following groups:
USERS
ALARM TYPES
TROUBLE TYPES
ZONE DEFINITIONS
KEYPAD CONDITIONS
PARTITION KEYPAD DEFINITION
For example, if requesting the Zone CS Code question, the Zone selection question will first
appear. After entry of the desired zone, the first question will appear for that zone.
6–2
Version 4