FBII XL-4 Programming Manual page 34

Lcd programming guide
Hide thumbs Also See for XL-4:
Table of Contents

Advertisement

XL-4, XL-4B, and XL-5 LCD Keypad Programming Manual
Special care should be made whenever changing the installer code value since subsequent
keypad programming sessions will require the code entered.
Dialing Type
014 DIAL
TONE
Selects the method that this control panel will use to dial the Central Station and is common
to both Central Station phone numbers. Depression of the 0 key will toggle through the
following options:
TONE
FAST TONE
PULSE
ADAPTIVE
1. The option labeled fast tone transmits the touch tone frequencies at twice the normal speed,
and will automatically revert to normal touch-tone if unsuccessful. This fast tone option may
not be valid in all telephone exchanges. In the ADAPTIVE dialing mode the control panel will
attempt to dial in normal touch tone and if dial tone is not broken revert back to pulse dialing.
2. This question will be skipped if all the telephone numbers are blank.
Dial Tone Detection
015 DIAL TONE
NO
Indicates whether the control panel will look for dial tone before attempting any dialing
attempt. If dial tone detection is selected then the panel will immediately dial if dial tone is
detected. This option can speed up outgoing dialing without the normal delays. If dial tone is
not present then the system will undergo the anti-jam sequence as described in question 023.
If the dial tone detection option is not selected then the system will follow the anti-jam
procedure as described in question 023.
Central Station Dialer Enable
016 DIAL ENAB
YES
This question indicates whether the communicator section will be active for the panel. If the
system is being operated as a local alarm only or the dialer operation should be suspended
enter NO. Default = YES.
Remote Operation
017 REM ENAB
YES
Indicates whether remote actions of any kind will be permitted on this panel. This includes
uploads, downloads, arms/disarms, bypasses and status checks. Remote operations can be
initiated through the EZ-Mate PC downloading software.
Questions 18 - 20 indicate specifically which remote actions will be permitted.
8–12
Touch Tone Dialing
Fast Touch Tone
Pulse (or rotary dialing)
Touch Tone with Pulse Backup
Version 4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-5Xl-4b

Table of Contents