Check to make sure the system is READY - Green ready light is lit followed by INSTANT followed by your user code STAY The On/Off light, the Instant light and the Stay light will all be on. SMOKE DETECTOR RESET Enter your four digit user code. XL-20 Owner’s Manual - Page 1...
8 zones (areas of protection). The door covering the buttons is optional and can be removed. The XL-20 is listed by Underwriters Laboratories for Household Fire and Burglary applications. Throughout this manual the following conventions are used to display the keystrokes required to perform the functions.
Your installer will show you how to activate these emergency keys. ZONE DESCRIPTION BUTTONS # & * Left 7 & 9 Center Right 1 & 3 XL-20 Owner’s Manual - Page 3...
Page 6
USER ID ASSIGNED TO (MASTER USER 1) *Master User can add, change, or erase other user codes. Monitoring Station Information Account # Telephone # XL-20 Owner’s Manual - Page 4...
This LED indicates whether the system is currently armed (ON) or disarmed (OFF). This LED will also blink fast to show that alarms have occurred or blink slowly upon failure to communicate with the Central Station. XL-20 Owner’s Manual - Page 5...
Page 8
Indicates Installer programming mode Fast Blink Alarm Memory Mode 7) STAY BUTTON The STAY button enables arming the system, excluding zones programmed as interior zones. This will provide exterior protection of the location while XL-20 Owner’s Manual - Page 6...
Page 9
No supervision conditions exist (normal) RF transmitter has not checked in for more than 12 hours BLINKING (fast) RF transmitter reports a tamper condition BLINKING (slow) Bell Output is in supervision XL-20 Owner’s Manual - Page 7...
OR if you intentionally wish to leave the zone off. Example: you wish to keep the window open for ventilation. Zones that are bypassed are not protected when the system is on. See Bypass for the correct procedure. XL-20 Owner’s Manual - Page 8...
Check to make sure the system is READY, when ready press: followed by your user code. INSTANT If successful the On/Off light and the Instant light be on. XL-20 Owner’s Manual - Page 9...
You can have different amounts of time for different entry points. See your system reference sheet for the times established for your system. Enter your four digit user code. If no alarms have taken place, the On/Off light (labeled arm) will go off. XL-20 Owner’s Manual - Page 10...
Page 13
After you have turned the system off with your user code the keypad will indicate alarm memory. To clear the display of the alarm or trouble conditions and silence the audible alert: Enter your four digit user code again. XL-20 Owner’s Manual - Page 11...
# then * to delete. Master User Code User ID New User Code CODE NOTE: User #1, the master user, cannot be deleted but it can be changed using the ADD OR CHANGE USER PROCEDURE. XL-20 Owner’s Manual - Page 12...
Only your installer can program a zone for the chime feature, but once programmed you can turn chime on or off to meet your daily needs. To turn chime on or off. Press # 6 XL-20 Owner’s Manual - Page 14...
(NFPA publication #74). Further information can be obtained by contacting: NFPA Public Affairs Dept., Batterymarch Park, Quincy, MA 02269. If you have any further questions about the operation of your system, please contact your alarm company. XL-20 Owner’s Manual - Page 15...
6. Establish a meeting place outside where everyone will meet. 7. Advise the local fire authority that you have installed a fire alarm system. 8. When the fire alarm signals, LEAVE IMMEDIATELY. Do not stop for belongings. XL-20 Owner’s Manual - Page 16...
Page 19
10. Contact the Fire Department from a neighboring house or business. 11. Everyone, including neighbors, should be familiar with your Fire and Burglary audible alarm sounders. Fire Alarm Sound is: __________________________ Burglar Alarm Sound is:__________________________ XL-20 Owner’s Manual - Page 17...
Mechanical tampering, masking, painting or spraying, of any material on the mirrors, windows or any part of the optical system can reduce their detection ability. Passive Infrared Detectors sense changes in temperature; however, as the ambient temperature of the XL-20 Owner’s Manual - Page 18...
Page 21
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones to learn about these developments. XL-20 Owner’s Manual - Page 19...
KEYPAD: A Keypad is your link into your system. It displays alarm and trouble messages, XL-20 Owner’s Manual - Page 20...
Page 23
(See the User Code List in the back of this manual) ZONE: A zone is a collection of sensors with common characteristics grouped together for your operating convenience. The system will support 6 zones or groupings. XL-20 Owner’s Manual - Page 21...
The user may not under any circumstances (in or out of warranty) attempt any service or repairs to the system. It must be returned to the factory or an authorized service agency for all repairs. XL-20 Owner’s Manual - Page 22...
EXCLUSIVE REMEDY AGAINST SELLER. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. No increase of alteration, written or verbal, to this warranty is authorized. XL-20 Owner’s Manual - Page 25...