Mitsubishi Electric FR-F720P-0.75K to 110K Instruction Manual page 176

Provide mechanical interlocks for MC1 and MC2. (Under V/F control or Simple magnetic flux vector control) The
inverter will be damaged if the power supply is input to the inverter output section.
When automatic restart after instantaneous power failure has been selected, the motor and machine will start
suddenly (after the reset time has elapsed) after occurrence of an instantaneous power failure. Stay away from
the motor and machine. When you have selected automatic restart after instantaneous power failure function,
apply in easily visible places the CAUTION stickers supplied to the Instruction Manual (Basic).
♦ Parameters referred to ♦
Pr. 7 Acceleration time, Pr. 21 Acceleration/deceleration time increments
Pr. 13 Starting frequency Refer to page 113
Pr. 65, Pr. 67 to Pr. 69 Retry function
Pr. 78 Reverse rotation prevention selection
Pr. 178 to Pr. 189 (input terminal function selection)
CAUTION
Refer to page 172
Refer to page 201
Refer to page 133
Operation selection at power failure
and instantaneous power failure
Refer to page 109
4
165