Mitsubishi Electric FR-F720P-0.75K to 110K Instruction Manual page 302

(2) Automatic parameter setting using the operation panel (parameter setting mode)
The communication setting parameters for the GOT connection with a PU connector are
Operation example
automatically set.
Operation
1.
Screen at power-ON
The monitor display appears.
2.
Press to choose the PU operation mode.
3.
Press to choose the
parameter setting mode.
4.
Turn until
appears.
5.
Press to enter the automatic
parameter setting mode.
6.
Turn until
7.
Press to read the present set value.
" " appears.
8.
Turn to change it to the set value " ".
9.
Press to set.
Pr.999 setting
10 GOT initial setting (PU connector)
20 50Hz rated frequency
Acceleration/deceleration time
31
(0.01s increment)
The inverter is not in the PU operation mode.
1.Press
2. Carry out operation from step 3 again.
(AUTO)
(GOT) appears.
Turn to read another parameter.
Press to show the setting again.
Press twice to show the next parameter.
Description
are displayed alternately ... Why?
.
is lit and the monitor (4-digit LED) displays "0." (When Pr.79="0 (initial setting)")
Display
PU indicator is lit.
Flicker Parameter setting complete!!
Operation in the parameter setting mode
(AUTO) → (GOT) → Write "1"
(AUTO) → (F50) → Write "1"
(AUTO) → (T0.01) → Write "1"
Useful functions
The parameter
number read
previously appears.
291
4