Ref Command Assignment (Available Only When The Extended Format Is Selected) (Only For The Fr-A800 Series) - Mitsubishi Electric 800 Series Instruction Manual

7.6.7 REF command assignment (available only when the extended format is
selected) (only for the FR-A800 series)
When AK = "15", commands can be assigned to Bits 8 to 15 of REF1 to REF7. Command value for the assigned command can
be given in REF1 to REF7 when AK  "15".
When AK  "15", the PNU number and the sub-index number must be set.
PNU
P10.1 REF1 command assignment
P10.2 REF2 command assignment
P10.3 REF3 command assignment
P10.4 REF4 command assignment
P10.5 REF5 command assignment
P10.6 REF6 command assignment
P10.7 REF7 command assignment
Item Data type
Aus16
Aus16
Aus16
Aus16
Aus16
Aus16
Aus16
PPO TYPE SUPPORT SPECIFICATION
7
63