Emc Directive-Compliant System Configuration - Mitsubishi Electric GT14 User Manual

5.2.2

EMC Directive-Compliant System Configuration

For information of the EMC Directive-compliant models please consult with your nearest Mitsubishi product provider.

GOT
Use any of the following GOTs with which CE mark logo is printed on the rating plate.
When using a GOT other than shown below, the system does not conform to the EMC Directive.
Item
GT1455-Q
GT1450-Q
POINT POINT POINT
Checking method of hard ware version.
Confirm the hardware version with the rating plate of the GOT.

Connection method
Use the following methods to connect with the GOT to ensure compliance with the EMC Directive.
Direct connection to CPU
Computer link connection
CC-Link connection (via G4)
Ethernet connection
GOT multi-drop connection
Other connections
*1 When connecting the GOT to other controllers as a PLC manufactured by other company, create the cable (by the user) and
configure the system to meet the EMC Directive specifications for the connected device.
POINT POINT POINT
Connected devices
If connecting to the PLC or microcomputer other than Mitsubishi products
(MELSEC-Q series, MELSEC-L series, MELSEC-QnA , MELSEC-A series or MELSEC-FX series) please
refer to the EMC Directive compliance manual for that specific device.
5 - 4
5. UL, cUL STANDARDS AND EMC DIRECTIVE
5.2 EMC Directive
Model
GT1455-QTBD
GT1455-QTBDE
GT1450-QMBD
GT1450-QMBDE
GT1450-QLBD
GT1450-QLBDE
: Compliant with EMC Directive
*1
Connection method
Hardware version of the GOT
Version C or later
Version C or later
AA
Hardware
version
: Not compliant with EMC Directive
-
GT14
*1