8.7 Stand
Stand is used to fix the GOT to standing status in order to debug the monitor screen data easily.
8.7.1
Applicable stand
The following stand is applicable for GT14.
Product name
Stand
8.7.2
Installing procedure
Adjust to
45 , 55 , 65 or 75 .
GOT
mounting face
8 - 10
8. OPTION
8.7 Stand
Model name
GT05-50STAND
Angle adjusting fitting
Stand for 5.7" (for GOT1000 series)
1.
Adjust the mounting angle of GOT with the angle
adjusting fitting of the stand.
2.
Put the GOT into the stand from the stand front side
and fix it using the mounting fixtures.
For how to mount the GOT, refer to the following.
6.5 Installation Procedure
For a detail of the stand, refer to the following.
GOT1000 STAND User's Manual
Description