Self Check; Memory Check - Mitsubishi Electric GT14 User Manual

14.2 Self Check

The following describes the functions available as the self check function.
Item
Carries out write/read check of the SD card, USB memory, built-in flash memory, or internal SRAM.

Memory check

[Password]
Drawing check Carries out missing bit check, color check and drawing check.
Font check Displays the character data on the screen to check visually.
Touch panel check
Checks whether there are no dead zone area in the Touch key minimum unit (2 dots
I/O check Carries out RS-232, RS-422/485 connecting target confirmation and self-loopback check.
Ethernet status check Sends a ping to check the Ethernet connection status.
14.2.1 Memory check

Memory check function
Memory check function carries out the write/read check of A drive (Built-in SD Card), C drive (Flash Memory), D drive
(Internal SRAM) and E drive (USB memory).
Function
A drive memory check
C drive memory check
D drive memory check
E drive memory check

Display operation of Memory check
Main Menu
( 9.3 Utility Display)
Touch
[Debug & self check]
5 9 2 0
Checks whether the memory (Built-in SD card) of the A drive can be read/written normally.
Checks whether the memory (Flash Memory) of the C drive can be read/written normally.
Checks whether the memory (Internal SRAM) of the D drive can be read/written normally.
Checks whether the memory (USB memory) of the E drive can be read/written normally.
Debug & self check
Memory check
14. GOT SELF CHECK (DEBUG AND SELF CHECK)
Description
Description
Self check
Touch
[self check]
Select the memory to check
and touch [Check].
Reference
14-3
14-6
14-10
14-12
2 dots).
14-14
14-17
Touch
[Memory check]
14 - 3
14.2 Self Check
9
10
11
12
13
14
15
16