Mitsubishi Electric GT14 User Manual page 92


Assign Ethernet I/F operation
The following describes how to operate the Ethernet I/F assign.
The setting operation is same as that of the communication setting screen.
10 - 6
10. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
10.1 Communication setting
1.
Touch the [Assign Ethernet I/F] button in
[Communication Setting].
2.
After the screen shown left is displayed, touch the
channel number specification menu BOX when
changing the channel number.
■
( 10.1.4 Channel number setting operation)
3.
For changing the parameter settings, touch the driver
display BOX.
( 10.2Communication Detail Setting)
4.
Touching the [OK] button reflects the changed
settings. Touching [ ] button returns the screen to
the [Communication Setting] screen.
5.
Touch the [OK] button in the [Communication Setting]
screen.
6.
Touching the [ ] button restarts the GOT and the
GOT operates with the changed settings.