Table of Contents
Advertisement
Checking error messages with the utility (Utility)
The error code and error message can be checked with the system alarm display of the utility when the object is not
set.
Error code and reference manual
Error
Error code
source
0 to 99
(Value of D9008)
Controller
100 to 299
300 to 399
*5
400 to 499
GOT
500 to 699
Network
800 to 999
1000 to 10000
CPU
(Value of SD0)
Motion
10001 to 10999
controller
CNC C70
11000 to 11999
Robot
12000 to 12999
controller
Servo
20016 to 20237
*3
amplifier
*1
For details of GOT special registers (GS262 to 264), refer to the following manual.
*2
The assigned error code for FXCPU is 100 to 109, which displays the status of M8060 to M8069.
(Example) When the error code (100) error occurs, correct the error according to the M8060 description.
*3
The error code displayed on GOT is calculated by changing the error code (Hexadecimal) displayed on the servo amplifier to the
decimal number and adding 20000 to it.
When referring to the manual of servo amplifier by the error code displayed as a GOT system alarm, subtract 20000 from the
GOT error code and change its lower three digits to the hexadecimal number.
(Example: When GOT system alarm is 20144, the error code of servo amplifier becomes 90
*4
Channel No. will not be stored depending on the error code.
For channel No. storage availability for each error code, refer to the following.
*5
An alarmed drive cannot be confirmed in the system alarm regarding file access; however, it can be specified by confirming the
file access error signal (b7 to 10) of system signal 2-2.
18 - 12
18. TROUBLESHOOTING
18.2 Error Message and System Alarm
14.3 System Alarm Display
Description
Error code of CPU (for ACPU)
Error code of the following
controllers
*2
FXCPU
Third party PLC
Temperature controller
(OMRON temperature controller
only)
Error code of the GOT main unit
function
Error code of the GOT
communication function
Error code of the GOT main unit
function
Error code of network
Error code of CPU
(for QCPU, QnACPU)
Error code of Motion controller
(Q173DCPU/Q172DCPU)
Error code of CNC (Q173NCCPU)
Error code of Robot controller
(Q172DRCPU)
Error code of servo amplifier
GT Designer3 Version1 Screen Design Manual (Fundamentals)
18.2.2 List of error message/system alarm
Channel No.
storage
*1
destination
User's manual of the ACPU connected with GOT
GS263
User's manual of the controller connected with the GOT
Deal with errors according to the error messages.
*4
GS262
18.2 Error Message and System Alarm
GS264
User's manual of the QCPU and QnACPU connected with
GOT
User's manual of the Motion controller connected with GOT
User's manual of the CNC C70 connected with GOT
GS263
User's manual of the Robot controller connected with GOT
User's manual of the servo amplifier connected with GOT
Reference
.)
H
Advertisement
Table of Contents
