Table of Contents
Advertisement
14. GOT SELF CHECK (DEBUG AND
SELF CHECK)
The GOT can display the screen for debugging and self-checking.
The following describes the functions available as the debugging and self checking functions.
Item
Debug
Self check
System alarm display
GOT start time
14.1 Debug
In this manual, the overview of the debugging function is described.
For display contents and operation procedure of debugging, refer to the following manual.
The following describes the functions available as the debugging function.
Item
System monitor
A list editor
FX list editor
Backup/restoration
14.1.1 System monitor
System monitor allows monitoring and changing the devices in controllers.
For display contents and operation procedure, refer to the following manual.
14.1.2 A list editor
MELSEC-A list editor allows changing the sequence programs in ACPU/QCPU (A mode).
For display contents and operation procedure, refer to the following manual.
14.1.3 FX list editor
FX list editor allows changing the sequence programs in an FX PLC.
For display contents and operation procedure, refer to the following manual.
System monitor, A list editor, FX list editor, Backup/restoration
Memory check, Display check, Touch panel check, I/O check, Ethernet status check
GOT error, CPU error
GOT start time
GOT1000 Series Extended/Option Functions Manual for GT Works3
The device of PLC CPU and buffer memory of intelligent function module can be monitored or tested.
The sequence program of ACPU can be list edited.
The sequence program of FXCPU can be list edited.
Data can be backed up/restored from the controller to GOT, or backup data can be deleted.
GOT1000 Series Extended/Option Functions Manual for GT Works3
GOT1000 Series Extended/Option Functions Manual for GT Works3
GOT1000 Series Extended/Option Functions Manual for GT Works3
14. GOT SELF CHECK (DEBUG AND SELF CHECK)
Description
Description
Reference
14-1
14-3
14-19
14-21
Reference
14-1
14-1
14-1
14-2
14 - 1
14.1 Debug
9
10
11
12
13
14
15
16
Advertisement
Table of Contents
