Table of Contents
Advertisement
(a) Add operation
Add operator information to the GOT.
13 - 78
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
1.
Touch the [Add] button.
2.
The Operator information edit screen is displayed,
and then touch an item to be edited.
(a) OperatorName
(b) OperatorID
(c) Level
(d) Password
(e) Make a permanent password
(f) Use ext. auth. ID
(g) Ext.auth. ID
(a)
Touch the OperatorName, and then the Operator
name input dialog box is displayed. Input an
operator name.
Character types to be input can be changed with
touching the following buttons.
: Alphabet capital
A-Z
: Alphabet small letter
a-z
0-9
: Numeric
When the input is completed, touch the [Enter] key.
(b)
Touch the OperatorID, and then the Operator ID
input dialog box is displayed.
Input an operator ID.
When the input is completed, touch the [Enter] key.
(c)
Touch the level, and then the Operator level input
dialog box is displayed. Input an operator level.
When the input is completed, touch the key.
When the level of the operator being login is
changed during editing the operator information, a
new level is not reflected until you log out of the
GOT once and log in the GOT again.
Advertisement
Table of Contents
