Table of Contents
Advertisement
(3) Operation to back up all data in the SRAM user area
13 - 72
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
13.2 Various Data Control
1.
To back up data in the SRAM user area to a drive
Select the drive where the data is to be stored, and
then touch the [Backup all area] button.
2.
The dialog box shown left appears.
Check the description of the dialog box. To back up
all data in the SRAM user area, touch the [OK]
button.
To cancel the backup, touch the [Cancel] button.
3.
When touching the [OK] button in
shown left appears for recheck.
Touching the [OK] button start the backup.
Touching the [Cancel] button cancels the backup.
4.
When the file, whose name is the same, exists in the
destination folder, the dialog box shown left appears
without starting the backup.
Touching [OK] button overwrites the file.
Touching the [Cancel] button cancels the backup.
5.
The completion dialog box appears when the
restoration is completed.
Touching the [OK] button closes the dialog box.
, the dialog box
Advertisement
Table of Contents
