Table of Contents
Advertisement
(7) Upload/setup cancel operation
(a) Upload operation
By upload operation, the project data is transferred from the C drive (Flash Memory) to the A drive (Build-in
SD card) or E drive (USB drive).
The SD card or USB memory after uploading can be used for downloading project data to another GOT.
(This item explains using the A drive.)
POINT
POINT
POINT
Before upload operation
The project data cannot be uploaded to the A drive when the project data of the A drive is set up.
Execute setup cancel (
(7)(b) Setup cancel operation) before uploading the project data.
1.
2.
3.
4.
5.
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
Touch [A: Built-in SD card] of [Select drive].
Touching [Upload] button displays the screen shown
on the left.
Touching [OK] button executes the upload.
If there is a project data of the same name in the A
drive, the screen shown on the left is displayed
without starting the upload.
Touching [OK] button executes an overwrite upload
to the project data of the same name.
Touching [Cancel] button cancels the upload.
When the uploading is completed, the dialog box
mentioned left is displayed.
Touching [OK] button restarts the GOT.
13.2 Various Data Control
9
10
11
12
13
14
15
16
13 - 25
Advertisement
Table of Contents
