Table of Contents
Advertisement
• In angle compensation mode, the shutter is
automatically switched to ON.
GAIN (gain compensation mode): When the
frame rate is changed, the video level is held
constant by automatically adjusting the
electrical gain. The shutter angle is held
constant.
Notes
• Depending on the selected format and FPS value,
the dynamic range (latitude) may decline up to a
1
maximum of
/
2
shooting scenes with high contrast.
• When the unit is shipped from the factory, the
frame rate ranges that can be selected for the
Select FPS function (see page 105) are limited.
When COMP MODE is set to OFF or ANGLE, it
is not possible to select a frame rate of 8 FPS or
below. This limitation is intended to prevent
degraded video quality. To remove this
limitation, change the setting of FPS LIMITER
on the <OTHERS 2> page of the
MAINTENANCE menu from LIMIT to FREE.
However, if you do set the frame rate to 8 FPS or
below, noise will become more prominent in the
picture. When you change the setting of FPS
LIMITER from FREE back to LIMIT, COMP
MODE is automatically set to OFF.
72
Restoring Factory Default Settings
. Be aware of this when you are
Restoring Factory
Default Settings
The <OPERATOR FILE> page of the Camera
>USER (OPERATION) menu allows you to
return the operation items on pages U02 to U14 of
the USER menu to the settings they had when the
unit was shipped from the factory default.
<OPERATOR FILE> page
Move the cursor to PRESET and press the MENU
SEL/ENTER dial. The operation items are reset
to the settings they had when the unit was shipped
from the factory.
See Chapter 8 "Storage and Retrieval of User
Setting Data" (page 172) for "Memory Stick" and
other file operations.
Advertisement
Table of Contents
