Restoring Factory Default Settings; Selecting The Gamma; Using The Standard Gamma - Sony SRW-9000 Operation Manual

Restoring Factory
Default Settings
The <OPERATOR FILE> page of the Camera
>USER (OPERATION) menu allows you to
return the operation items on pages U02 to U14 of
the USER menu to the settings they had when the
unit was shipped from the factory.
<OPERATOR FILE> page
Move the cursor to PRESET and press the MENU
SEL/ENTER dial. The operation items are reset
to the settings they had when the unit was shipped
from the factory.
See Chapter 8 "Storage and Retrieval of User
Setting Data" (page 167) for "Memory Stick" and
other file operations.
70 Restoring Factory Default Settings / Selecting the Gamma

Selecting the Gamma

In addition to the built-in standard gamma and
HyperGamma curves, you can create and use
your own user gamma tables.
Use the <GAMMA> page of the Camera >USER
(PAINT) menu to turn gamma correction on and
off and to select gamma curves.
<GAMMA> page
You can also select the gamma on the gamma
table selection page (page 51) of the subdisplay.

Using the Standard Gamma

Standard gamma provides video gamma curves
intended mainly for the creation of broadcast
content. It is used in combination with the Knee
function, which adjusts the dynamic range of
high-luminance areas.
When STANDARD is selected on the first line of
TABLE on the <GAMMA> page, you can select
from among the following standard gamma
curves.
Gamma Gamma curve
table No.
1 Equivalent to SD ENG camcorder
2 Equivalent to 4.5-times gain
3 Equivalent to 3.5-times gain
4 Equivalent to SMPTE-240M
5 Equivalent to ITU-R709
6 Equivalent to 5.0-times gain
The No. 5 (ITU-R709) curve is recommended for
normal use.