Table of Contents
Advertisement
HD SDI MON1, HD SDI MON2
BNC×2
HDSDI: SMPTE 292M (embedded
audio, timecode, character on/off)
HD SDI OUT A/B (when the optional HKSR-
9001 is installed)
BNC×2
HDSDI 1.5G Single Link: SMPTE
292M (embedded audio, timecode)
HDSDI 1.5G Dual Link: SMPTE 372M
(embedded audio, timecode)
HDSDI 3G Single Link: SMPTE 424M
(embedded audio, timecode)
TC OUT
BNC, 1.0 Vp-p, 75 Ω
DC OUT
4-pin, (for wireless microphone
receiver), 11 to 17 V DC (max. 0.5 A)
Input/Output connector
LENS
12-pin
REMOTE
8-pin
EXT I/O
5-pin
CTRL (CAM)
CTRL (VTR)
Supplied Accessories
Operation Manual (1)
Lens mount cap (1)
V-shoe plate (1)
V-shoe plate attachment screws (K4×8, 6)
Cable holder (1)
Control panel cable (L) (1)
Viewfinder shoe assembly (1)
Viewfinder holding plate (A) (1)
Viewfinder holding plate (B) (1)
Conversion screw (1)
B4×8 screws for viewfinder holding plate (B)
attachment (2)
M3 hex socket head bolts for viewfinder shoe
attachment (2)
Optional Accessories
See "Example System Configuration" (page 14).
202
Specifications
Design and specifications are subject to change
without notice.
Notes
• Always make a test recording, and verify that
it was recorded successfully.
SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING,
BUT NOT LIMITED TO, COMPENSATION
OR REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS
RECORDING MEDIA, EXTERNAL
STORAGE SYSTEMS OR ANY OTHER
MEDIA OR STORAGE SYSTEMS TO
RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating
properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT
ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
Advertisement
Table of Contents
