Sony SRW-9000PL Operation Manual page 54

Functions that can be assigned to assignable
buttons 1 to 3, 5 to 8, N, and C
Menu indication
ND
REC REVIEW
PB(VF/VBS)
a)
MLUT
FAN MODE
VTR SAVE
BARS
STOP
REW
PLAY
F.FWD
GAIN
WHITE BAL
GAIN-9/18dB
OFF
a) When using S-LOG A
Functions that can be assigned to assignable
switch 4
Menu indication
AWB
BARS
TEST1
OFF
54 Basic Settings with the Subdisplay
Function
ND Switch ND filters
With REC REVIEW set to
NORM, the last part of the
recorded tape is normally
rewound for three seconds
(maximum: 10 seconds) then
played back. With REC
REVIEW set to ALL, the tape
is rewound to the recording
start position then played
back.
The video signals being
played back are output to the
viewfinder.
On/Off of the fixed ITU-R709
gamma of the viewfinder and
the monitor
Switching of the fan mode
Switching of the VTR power
supply mode (SAVE, STBY)
Display color bars
Stop tape transport
Rewind the tape
Play the tape
Fast forward the tape
Switch the gain position
Switch the white balance
memory
The gain value is temporary
set to –9 dB or –18 dB (gain
drop function). Each press of
the button switches gain value
in the following order; –9 dB
t –18 dB t OFF t –9 dB
···. If the gain value is kept
unchanged from –9 dB or –18
dB, gain drop function is
cancelled.
None
Function
Automatic white balance
adjustment
Color-bar indication
Test signal output
None
Note
Even if AWB is assigned to assignable switch 4, AWB
does not function in Cine and Cine-EI modes.
Assignable buttons 1 and 2 setting page
You can assign the functions of buttons 1 and 2 on
the first and second lines, respectively.
Assignable button 3 and switch 4 setting
page
You can assign the functions of button 3 and
switch 4 on the first and second lines,
respectively.
Assignable buttons 5 and 6 setting page
You can assign the functions of buttons 5 and 6 on
the first and second lines, respectively.
Assignable buttons 7 and 8 setting page
You can assign the functions of buttons 7 and 8 on
the first and second lines, respectively.
Assignable buttons N and C setting page
You can assign the functions of buttons N and C
on the first and second lines, respectively.