Sony SRW-9000PL Operation Manual page 163

Item
OUTPUT SEL
Track selection (when the
optional HKSR-9001 is
installed)
PHONE SEL
MIX MODE
REC LEVEL
PB LEVEL
METER TYPE
PEAK HOLD
Settings
CH1 Selects the track to assign to channel 1 of the SDI output.
Track1 to Track12
CH2 Selects the track to assign to channel 2 of the SDI output.
Track1 to Track12 (Track 2)
CH3 Selects the track to assign to channel 3 of the SDI output.
Track1 to Track12 (Track 3)
CH4 Selects the track to assign to channel 4 of the SDI output.
Track1 to Track12 (Track 4)
CH5 Selects the track to assign to channel 5 of the SDI output.
Track1 to Track12 (Track 5)
CH6 Selects the track to assign to channel 6 of the SDI output.
Track1 to Track12 (Track 6)
CH7 Selects the track to assign to channel 7 of the SDI output.
Track1 to Track12 (Track 7)
CH8 Selects the track to assign to channel 8 of the SDI output.
Track1 to Track12 (Track 8)
CH9 Selects the track to assign to channel 9 of the SDI output.
Track1 to Track12 (Track 9)
CH10 Selects the track to assign to channel 10 of the SDI output.
Track1 to Track12 (Track 10)
CH11 Selects the track to assign to channel 11 of the SDI output.
Track1 to Track12 (Track 11)
CH12 Selects the track to assign to channel 12 of the SDI output.
Track1 to Track12
Selects the audio signals output to the EARPHONES jack.
Selects the method of mixing audio signals output to the
EARPHONES jack.
ADD [Add]: Simple addition
RMS [RMS]: Multiplied average (root mean square)
AVG [Average]: Simple average
Adjusts the audio recording level (see page 91). (This
adjustment is impossible during playback.)
Adjusts the audio playback level (see page 86). (This
adjustment is impossible during recording.)
Sets the audio level meter display range.
PEAK [Full Peak]: Display 0 dBFS as the peak value.
REF [Full Ref]: Display the reference level (+4 dBu) as 0
FINE [Fine]: Display a scale with 0.25 dB steps centered
Selects whether to use the peak hold function.
ON [On]: Use.
OFF [Off]: Do not use.
dB.
around –20 dB.
VTR Menu List 163