Sony SRW-9000PL Operation Manual page 84

2
Turn the SELECT/ENTER dial to
select a sub-item in the submenu
window, and then press the dial.
A setting window appears.
Setting window
3
Turn the SELECT/ENTER dial to
select a value, and then press the dial.
This returns you to the submenu window.
4
Repeat steps 2 and 3 as required.
5
In the submenu window, select [SET].
6
Make sure of the format, select "OK",
and then press the SELECT/ENTER
dial.
A message appears to inform you that the
format has been set, and you return to the
HOME screen.
To set with OTHERS
1
Turn the SELECT/ENTER dial to
select OTHERS, and then press the dial.
A submenu window appears.
84 Recording
Submenu window
2
Select FORMAT LIST, and then press
the SELECT/ENTER dial.
The Format List screen appears.
A bar appears for formats that cannot be
used. A yellow or green check mark appears
for formats that can be used. The check mark
is green for formats that can be used when the
SELECT FPS function is enabled.
See "Select FPS Function" (page 105) for more
information about the Select FPS function.
3
Move the cursor to the format you want
to use.
To move the cursor left and right
Turn the SELECT/ENTER dial.
To move the cursor up and down
Turn the SELECT/ENTER dial with the
FUNC button held down.
4
Press the SELECT/ENTER dial.
To change the "SELECT FPS" setting, move
the cursor and press the ENTER button while
holding the FUNC button down.
5
Make sure of the format, select "OK",
and then press the SELECT/ENTER
dial.
A message appears to inform you that the
format has been set, and you return to the
HOME screen.