Sony SRW-9000PL Operation Manual page 36

a)
HDSDI
input
Audio input
a) 75 Ω coaxial cable
b) The HD SDI MON2 connector and the HD
SDI MON1 connector on the side panel can
also be used.
To use the HD SDI OUT A connector: Set GL-
MODE on the <Genlock> page to SDI.
To use the HD SDI MON1/2 connectors: Set
GL-MODE on the <Genlock> page to MON.
Note
When SYSTEM Setup >FORMAT >INPUT SEL in the
VTR menu is set to AUX Input, it is not possible to
multiplex audio signals into HDSDI signals because
there is a phase difference between HDSDI outputs and
AUX IN inputs.
To input audio signals, multiplex them into external
HDSDI signals (see the next section "Multiplexing audio
signals into external HDSDI signals).
Multiplexing into external HDSDI signals
Set REFERENCE on the <GENLOCK> page of
the Camera >MAINTENANCE menu to AUX
IN.
36 Connecting Audio Input
a)
HDSDI
output
a)
Audio input
HDSDI signal
generator, VTR
a) 75 Ω coaxial cable
HDSDI
output
HDSDI
input