Viewing The Function (Format/Switch Function)/System (System Settings) Display; Specifying And Displaying Markers - Sony SRW-9000PL Operation Manual

Item Setting
5600K Custom mode: 5600K ON/OFF
Cine/Cine-EI mode: ON for Daylight,
OFF for Tungsten
SHUTT Shutter mode ON/OFF
FAN Fan operation mode selection:
AUTO1, AUTO2, MIN or MAX
Viewing the FUNCTION (Format/
Switch Function)/SYSTEM
(System Settings) Display
When the ABNORMAL<'!'> screen (see
page 64) is displayed, you can press the
CANCEL/STATUS button repeatedly to cycle
through the following screens.
FUNCTION 1 screen t FUNCTION 2 screen
t SYSTEM screen t basic status indications
t ...
FUNCTION 1 screen
This screen shows the functions assigned to the
assignable buttons/switch.
For functions that can be assigned, see "Assigning
Functions to Assignable Buttons/Switch" (page 53).
FUNCTION 2 screen
a Zebra settings
Displays the zebra settings.
b Gain switch values
Displays the values assigned to the L/M/H
positions of the gain switch.
SYSTEM screen
a Format
Display the current video format.
For details on the formats, see "Detailed Video
Format Settings" (page 77).
b Monitor output settings
Displays the current settings of the monitor
outputs.
c Genlock status
Displays the reference signal setting and the
status of the input signal.
Specifying and Displaying
Markers
You can display various markers, such as the
center marker and safety zone marker, on the
viewfinder and monitor screens.
Viewing Settings and Indications in the Viewfinder 65