Sony SRW-9000PL Operation Manual page 66

Example: Center marker (entire cross)
Example: Safety zone marker (90%)
The <CHAR/MARK MIX> page and
<MARKER SETTING> page of the Camera
>USER (OPERATION) menu allow you to
switch the display of the markers on or off and to
specify the appearance, and parameters of the
markers.
Activating/deactivating marker display
on each output
The <CHAR/MARK MIX> page allows you to
activate and deactivate the display of markers on
each output.
<CHAR/MARK MIX> page
The display of markers (MARKER) is set to ON
for all outputs when the unit is shipped from the
factory.
Item Setting
VF Turn all the markers on or off in the
viewfinder.
MON Turn the markers on or off on the
monitors connected via the HD SDI
MON1 or HD SDI MON2 connector.
66 Viewing Settings and Indications in the Viewfinder
Item Setting
HD-Y Turn the markers on or off on the
monitors connected to the HD SDI OUT
A/B connectors (when the HKSR-9001
is installed).
VBS Turn the markers on or off on the
monitors connected via the TEST OUT
and REMOTE connectors.
The CHAR/MARK LEVEL line allows you to
adjust the brightness (0 to 50) of the character and
marker indications.
Specifying the markers to be displayed
The <MARKER SETTING> page allows you to
select the markers that you want to display.
The selected markers will appear on an output if
marker display for that output has been activated
on the <CHAR/MARK MIX> page.
<MARKER SETTING> page
All the markers have been set to OFF at the
factory.
Item Setting
CENTER Set to ON to display the center
marker and select the type of the
center marker.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
SAFETY Set to ON to display the safety
zone marker and specify the range
(80%, 90%, 92.5%, or 95%).
EFFECTIVE Set to ON to display the effective
pixel area.
ASPECT Set to ON to display the aspect
marker and specify the aspect:
2.40:1, 2.35:1, 1.85:1, 1.66:1,
16:9, 15:9, 14:9, 13:9, 4:3, VAR
H, VAR V