Adjusting The Brightness Of The Subdisplay; Selecting Gamma Tables; Selection Of Color Spaces; Selecting Pages To Display In The Subdisplay - Sony SRW-9000PL Operation Manual

Adjusting the Brightness of the
Subdisplay
You can adjust the brightness of the subdisplay to
one of eight levels.
Subdisplay brightness adjustment page
The higher the value, the brighter the display.

Selecting Gamma Tables

In Cine mode or Custom mode, you can select the
gamma curves on the gamma table selection page.
Gamma table selection page
Note
This page is for display only and not operative in Cine-
EI mode. The gamma curve setting is fixed to S-LOG A
in Cine-EI mode.
Select the gamma table (STANDARD, HYPER,
SPECIAL, or USER) on the first line and the
gamma curve on the second line.
For details on the available gamma curves, see
"Selecting the Gamma" (page 73).

Selection of Color Spaces

In Cine mode or Custom mode, color
reproducibility can be selected on the color space
selection page of the subdisplay.
For details on color space, see "Color Space
According to the COLOR SPACE Settings" (page
203)
Color space selection page
Note
This page is for display only and not operative in Cine-
EI mode. The color space setting is fixed to S-GAMUT
in Cine-EI mode.
Select the color space mode (S-GAMUT, F900,
F900R, or DCDM REF PJ) on the second line.
You can also select the color space by using the
<BASE SETTING> page (see page 43).
Selecting Pages to Display in the
Subdisplay
Use the setup mode of the subdisplay or the
OPERATION menu of the Camera menu.
To set the subdisplay to Setup mode
Hold the PAGE button pressed for more than five
seconds to set the subdisplay to Setup mode.
Subdisplay in Setup mode
Select a page in the first line, and select ON or
OFF on the second line.
Pages that are set to OFF will not appear in the
subdisplay.
Indication Target page
SHUTTER Shutter settings page
RAMP Ramp settings page
FORMAT Video format selection page
ND Optical filter status page
GAIN/WHT/ Gain setting page
5600K
GAIN L/M/H Gain switch values (L/M/H)
page
LENS FILE Lens file selection page
VTR STATUS VTR status page
TC/TAPE REM Timecode/tape remaining
page
VOLT/FAN Voltage check/Fan mode page
CHAR MIX Character data page
ASSIGN SW1/ Assignable buttons 1 and 2
SW2 setting page
ASSIGN SW3/ Assignable button 3 and
SW4 switch 4 setting page
ASSIGN SW5/ Assignable buttons 5 and 6
SW6 setting page
ASSIGN SW7/ Assignable buttons 7 and 8
SW8 setting page
Basic Settings with the Subdisplay 55