Sony SRW-9000PL Operation Manual page 138

PAINT menu
Page title &
purpose
<SCENE FILE>
Storing and
retrieving scene
files (data set by
the PAINT menu)
Noise Suppression
You can enable this function on the <NOISE
SUPPRESS> page of the PAINT menu. It allows
you to effectively suppress noise components
while preserving fine-grained edge components.
The noise suppression function of this unit
employs a system that extracts and suppresses
noise within frames. Compared to inter-frame
methods, it delivers excellent results when
applied to moving subjects.
You can select from among 4 effect levels; LOW
(30%), MID (60%), HIGH (90%), MAX (100%).
LOW: To mainly cut noise components in the
high range
MID: To mainly cut noise components in the
high and middle ranges
138 Camera Menu List
No. Item
P15[ - - ] 1
2
3
4
5
STORE
STANDARD
READ
t
(MS CAM)
WRITE
t
(CAM MS)
FILE ID
CAM CODE SRW-9000PL
DATE
Default Settings
01 01 to 32
Execute by ENTER
Execute by ENTER Read the standard paint
Execute by ENTER Load scene files from a
Execute by ENTER Write scene files in
Max.14 characters
Camera code
Date of file creation Display only
HIGH: To mainly cut noise components in the
high, middle, and low ranges
MAX: To mainly cut noise components in the
high, middle, and low ranges
The percentage values are approximate
indications of the effect, when the maximum is
100%.
Note
Because this function has some effect on the
frequency components of the video, the edges of
low-luminance blocks may be weakened. A
preliminary test shooting is recommended.
Remarks
When storing a file in
internal memory,
specify the number
before executing
STORE.When reading,
only specify the
number.
Specify the scene file
number 01 to 32 when
32 SCENE FILE of
<OTHERS 2> of the
MAINTENANCE
menu is ON.
data
"Memory Stick" to
internal memory.
internal memory to a
"Memory Stick".
Enter a comment for
the scene files to be
written to a "Memory
Stick".
Display only (when
files made by the unit
are detected, "SRW-
9000PL" is displayed).