Setting The Monitor Picture - Sony SRW-9000PL Operation Manual

Setting Output
VBS VBS signals (default)
HD-Y HD-Y signals
FRAME One pulse per frame
Example 1: SHUTTER OFF
1 frame
CCD
Exposure
exposure
Frame
pulse
Example 2: SHUTTER ON, shutter angle 180º
1 frame
CCD
Exposure
exposure
Frame
pulse
RM VIDEO
You can select the video signals to be output to
equipment connected via the REMOTE
connector.
Setting Output
VBS The VBS signals (default)
HD-Y The HD-Y signals

Setting the Monitor Picture

Using the <PB/MON LUT> page of the Camera
>USER (OPERATION) menu, you can select the
gamma setting of the monitor picture and the
playback picture monitor mode.
Exposure
To apply monitor LUT to the monitor
picture
When MLUT/PBMIX is set to MLUT, the
monitor LUT (ITU-R709) appropriate for
monitoring is applied to the video signals output
Exposure
from the VF, HD SDI MON1, HD SDI MON2,
and REMOTE connectors. The video output
signals from those connectors are selected on the
<MONITOR OUTPUT> page.
This setting is effective when S-LOG gamma is
applied to the video output signals for recording
intended for postproduction editing.
1) The VBS output signal always becomes the camera
Notes
• The monitor LUT function is enabled when you are
using S-LOG A.
• Some of the paint settings (black, gamma, knee, detail,
matrix, etc.) for the main line are not applied to
monitor LUT.
To monitor the playback picture
You can monitor the on a playback picture can be
confirmed with an external monitor or on the
viewfinder screen.
1)When MLUT/PBMIX is set to MLUT or OFF, the
You can change the PB setting separately for the
VF/VBS and MON to select their playback signal
output modes.
<PB/MON LUT> page
image to which ITU-R709 gamma is applied.
1)
same gamma as that applied to the main line is applied
to all the outputs. When MLUT/PBMIX is set to
PBMIX, the PB and PB MIX modes can be
independently selected for the VF/VBS and MON. VF
and VBS output the same signals respectively.
Setting the Camera Outputs
1)
59