Checking The Operating Status Of The Vtr Module; Checking Timecode And The Remaining Tape Time; Checking The Power Voltage And Selecting The Fan Mode - Sony SRW-9000PL Operation Manual

Checking the Operating Status of
the VTR Module
You can check the operating status of the VTR
module in the subdisplay. When the unit is in
recording pause mode, you can also use this page
to switch the power supply to the VTR module
between power saving (SAVE) mode and standby
(STBY) mode.
The first line shows the operating status of the
VTR module (REC PAUSE, REC, F.FWD,
REW, PLAY, STOP, etc).
The second line shows the VTR module power
supply mode (SAVE, STBY) when it is in stop
mode (STOP), recording pause mode (REC
PAUSE), or playback pause mode (PLAY
PAUSE). Use an assignable button/switch to
which the VTR SAVE function is assigned to
select SAVE or STBY.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 53).
Checking Timecode and the
Remaining Tape Time
The timecode/tape remaining page allows you to
check timecode and the approximate remaining
tape time (unit: minutes).
Timecode/tape remaining page
The first line displays a timecode value, and the
second line displays the approximate tape
remaining time, within the range 1 to 99 minutes.
The following table lists the types of timecode
that appear.
Indication
TCR 00:00:00:00
TCR 00:00.00:00
52 Basic Settings with the Subdisplay
Meaning
Timecode data of the LTC
reader
Timecode data of the LTC
reader (DF)
Indication Meaning
TCR.00:00:00:00 Timecode data of the VITC
reader
UBR 00 00 00 00 User bit data of the LTC
reader
UBR.00 00 00 00 User bit data of the VITC
reader
TCG 00:00:00:00 Timecode data of the
timecode generator
TCG 00:00:00.00 Timecode data of the
timecode generator (DF)
UBG 00 00 00 00 User bit data of the timecode
generator
CTL -0:00:00:00 Data of the CTL counter
T*R 00:00:00:00 Timecode cannot be read with
the LTC reader.
U*R 00 00 00 00 User bits cannot be read with
the LTC reader.
T*R.00:00:00:00 Timecode cannot be read with
the VITC reader.
U*R.00 00 00 00 User bits cannot be read
with the VITC reader.
See "To select time data to display during playback"
(page 92) for information about how to switch
between different types of timecode.
Checking the Power Voltage and
Selecting the Fan Mode
Voltage check/Fan mode page
The first line allows you to check the battery
voltage, and the second line displays the
operating mode of the internal fans.
To select the fan mode
You can select the fan mode from the modes in
the following table.
Setting Operation of the fans
AUTO1 (default) The fans are controlled
automatically according to the
unit's internal temperature.
During recording, they are
controlled for quiet operation.
Normally use this mode.