Locations And Functions Of Parts; Front Panel; Left Side - Sony SRW-9000PL Operation Manual

Locations and Functions
of Parts

Front Panel

a VF (viewfinder) connector (20-pin)
Connect an optional viewfinder.
b Viewfinder shoes
When you attach the supplied viewfinder shoe
assembly to the handle, you can mount a
viewfinder on either of two shoes.
The attachment position of both viewfinder shoes
can be adjusted up and down.
For details, see "Attaching the Viewfinder" (page
32).
c LENS connector (12-pin)
If you mount an optional lens with a cable,
connect the cable to this connector. You can
control the functions of the lens through this
connector.
Note
Do not connect a device whose maximum rated current
is 1 A or higher to the LENS connector.
d Lens mount cap
Cover the lens mount with this cap when a lens is
not attached. The cover may be removed by
rotating the lens fixing lever upward.
16

Locations and Functions of Parts

e Lens mount
Attach the lens. When no lens is mounted, keep
the lens mount cap fitted for protection from dust.
For details, see "Mounting the Lens" (page 31).
f Lens fixing lever
Push these levers downward to secure the lens in
the lens mount. To remove the lens, pull up on the
lever.

Left Side

Shoulder pads
a Cassette insertion slot
Insert cassettes.
For details, see "Loading and Unloading Cassettes"
(page 82).
b CTRL (VTR) (control panel) connector
Connect the cable of the supplied control panel. A
short cable is connected when the unit is shipped
from the factory. You can exchange the short
cable for the supplied extension cable.
For details, see "Attaching the Control Panel" (page
37).
c Measure hook/focus reference mark (φ)
For actual measurement of the distance from a
subject, you can fix the end of a tape measure to
the hook.
A mark on the side panel (φ) indicates the
reference focus position.