Vtr Menu List; Tc (Timecode) Setup Menu - Sony SRW-9000PL Operation Manual

VTR Menu List

TC (Timecode) Setup Menu

The TC (timecode) Setup menu allows you to make settings related to timecode.
• Factory default settings are underlined.
• Square brackets indicate settings as displayed in setting windows (see page 158).
Item
TIMER SEL
TIMER RESET
TIMER PRESET
TCR SEL
TCG MODE
Settings
Selects the type of time data to use.
CTL [CTL Timer]: Display the tape running time in
Hours:Minutes:Seconds:Frames format.
TC [Time Code]: Display timecode.
UBIT [User Bit]: Display user bits.
Resets the internal timecode generator. Time data is
displayed as 00:00:00:00 (timecode) or 00 00 00 00 (user
bits).
Note
The values read by the timecode reader cannot be reset.
The timecode generator cannot be reset when it is locked to
external timecode or to the values read by the internal timecode
reader.
Selects the type of time data to preset to an arbitrary value.
TCG TC: Timecode generated by the timecode generator
TCG UBIT: User bits generated by the timecode
generator
CTL: CTL signal count
Selects the type of timecode which you want the internal
timecode reader to read during playback.
AUTO [AUTO]: Read VITC when the playback speed is
1
less than ± / times normal speed, and LTC when the
2
playback speed is more than ±
LTC [LTC]: Read LTC.
VITC [VITC]: Read VITC.
Selects the type of timecode to which the internal
timecode generator synchronizes.
PRST [Preset]: Synchronize to a preset value. You can
use the TIMER PRESET item to preset the initial
value of the timecode generated by the internal
timecode generator.
RGN [Regen]: Synchronize to the timecode selected in
the following item REGENE SOURCE (regenerate).
1
/ times normal speed.
2
VTR Menu List 159